ELECRAFT KRX3 Instruções de Operação descarregar pdf (Página 35)

Installing the KRX3 Subreceiver Module

If you haven’t removed it already, remove the chassis stiffener bar. The stiffener is shown in Figure 7.

The exposed rim of Battery BT1 on the K3 main RF board must be insulated to prevent shorting against the

bottom of the KRX3 enclosure. A plastic battery cover is provided. Fold the battery cover as shown in Figure

43. Pinch the creases to set the bends to form a rectangular box with one open end, then wrap the cover with thin

transparent tape such as Scotch



Magic

mending tape (see Figure 44). The tape ensures the cover holds its

shape over time.

Figure 43. Folding the Battery Cover.

Place the battery cover on BT1 on the K3 RF board as shown in Figure 44. Hint: gently squeeze the narrow

ends of the cover to make the sides bow outward to fit over the battery clip more easily. The cover is held in

place by friction against the battery holder and will be trapped under the KRX3 enclosure.

Figure 44. Installing the Battery Cover

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Sem comentários

ELECRAFT KRX3 Instruções de Operação Página 35