Elecraft KXPA100 Programmers Reference Manual do Utilizador descarregar pdf (Página 11)

^DM (ATU Display Frequency Memory, GET only)

GET format: ^DMfffff; where fffff is a frequency in kHz, from 01500 through 60000.

RSP format:

^DM Ffffff BNbb BINnnn FRccccc-ddddd

AN1 BYy SIt CRhh LRhh

AN2 BYy SIt CRhh LRhh;

Where: fffff is the frequency, bb is the Band Number (see ^BN), nnn is the 0-based index of the

frequency memory “bin” within the band, ccccc-ddddd is the frequency range for that bin. The two

frequency memories for antenna 1 and 2 are then displayed: ATU bypass relay setting (BYN or BYB),

ATU Side Relay setting (SIT for Side Transmitter and SIA for Side Antenna), and the capacitor (CR) and

inductor (LR) relay settings. “EMPTY” is displayed for erased frequency memories.

Example:

^DM03805;

^DM F03805 BN01 BIN040 FR03800-03819

AN1 BYN SIT CR0E LRD8

AN2 EMPTY;

^EC (Erase Configuration, SET only)

SET format: ^EC; erases EEPROM containing ATU frequency memories, per-band settings and all

configuration selections, including the current RS-232 speed. Configuration and per-band settings are

formatted to default values during restart after a microcontroller reset. ^EC; does not disturb the

KXPA100 serial number, its fault table, or factory calibration data.

^EC; is ignored while the ATU is tuning or transmitting.

^EC is used by the KXPA Utility Reset Configuration dialog.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sem comentários

Elecraft KXPA100 Programmers Reference Manual do Utilizador Página 11